The system runs on wheel based platform with rotary sensors mounted on each wheel to precisely measure and control wheel movement. The mobile animated head system has total of 7 degree of freedom, 5 for the upper head and 2 for the mobile platform. The eyes can pan and tilt, eye cover and mouth can close and open independently, and the neck can pan and tilt too. This system is fully integrated and tested. The technology behind such system evolved from Distributed Computation Robotic Architecture which was originally developed for Dr Robot Humanoid Robot. Through the integrated high bandwidth (11Mbps) WiFi 802.11 wireless module, the system can upload all the sensor information including the rotary sensor readings to your home PC at over 20Hz rate and streams audio (8Hz x 8bits) and video (up to 4 fps) to your home PC for your high level AI schemes to process. Your control commands are sent down to this mobile system at real-time via the same wireless link at a rate of 10-50Hz. With the supplied WiRobot development software components (for MS Windows 2000 and up), you get access to all these data information in standard Microsoft Windows programming environment (e.g. MS VB and VC++). With such approach, you have no limit on mobile system processing power, memory and storage any more. For users of non-Windows operating systems (e.g., Linux), we will provide the raw communication protocol for direct integration with any other system/device. With such system, you could develop your own intelligent robotic assistant, security robot or simply use it as a platform for your projects like human-machine interaction, mobile system navigation, robot behavior, image processing, object recognition, voice recognition, tele-operation, remote sensing, map building and localization etc.

Customers will be responsible for all taxes and duties as Item is shipped directly to customer from manufacturer.

Price:£ 1,952.00

New to NXT 2.0 release is a colour sensor that can be used to let the robot you build determine colours before acting on that information along with the ability to control it via a PC or Mac with the accompanying software.

With Bluetooth still present, users will get the chance to build four new models from the 619 piece set; a new version of the robot - Alpha Rex, Robocator - a fierce looking crocodile, Shooter bot - a robot that shoots balls, and Colour sorter - yes a robot that sorts coloured balls.

Other new features include the inclusion of ten robot instructions from the software rather than two as in the previous model.

The heart of the new system is the NXT 2.0 brick, an autonomous 32-bit LEGO microprocessor that can be programmed using a PC, or for the first time in the retail offering, a Mac. After building their robots, users create a program within easy-to-use yet feature-rich software, powered by LabVIEW from National Instruments.

What is LEGO® MINDSTORMS® NXT?

LEGO MINDSTORMS NXT is a robotics toolset that provides endless opportunities for armchair inventors, robotics fanatics and LEGO builders ages 10 and older to build and program robots that do what you want.  

LEGO MINDSTORMS NXT is the second generation of robotics products from The LEGO Group, which launched the first generation of LEGO MINDSTORMS in 1998 with the LEGO MINDSTORMS Robotic Invention System. 

LEGO MINDSTORMS NXT was launched in 2006, with the first version of the robotics toolkit, the NXT 1.0, which was a tremendous success, introducing entry-level robotics to children from age 10 and up, with state-of-the-art hardware and easy-to-use programming software.  

In just 30 minutes young robot creators can build and program their first working robot. 
 

What is the difference between the NXT 2.0 and the NXT 1.0 version?

The NXT 2.0 set has a bigger and revised element assortment of 619 elements, 16 building and programming challenges for 4 new fun and action-packed robotic models complete with building instructions. The new hardware mix consist of an NXT micro-controller, 3 Interactive Servo Motors – with built-in Rotation Sensors, 1 Ultrasonic Sensor, 2 Touch Sensors and the new Color Sensor with triple functionality; it acts a Color Sensor – detecting different colors, as a Light Sensor – seeing different light intensities and also works as a Color Lamp. 
 

What is in the new LEGO MINDSTORMS NXT 2.0 set? 

The LEGO MINDSTORMS NXT 2.0 comes with new models, new technology and new software features. 

The NXT 2.0 set has a big assortment with 619 new hand-picked elements, including the NXT hardware, for building thousands of robotic inventions.  

It comes with new step-by-step building instructions and 16 challenges for 4 new, fun and action-packed robots, ranging from a robotic vehicle, an animal robot, a robotic machine to ultimately a humanoid robot. 

The software has features that make it easy for children to customize and personalize their robots, by adding their own sounds and images to the NXT, and even getting control over their robot directly from their PC. 
 

What are the new models about?

The 4 new models have been optimized to be easy to build with ranging complexity, going from the Quick Start model that you can assemble and program in under 30 minutes, to the ultimate Humanoid – which is also easy to assemble and all models are designed for easy battery change. 

Shooterbot, a moving vehicle robot that can guard your room and will shoot balls at intruders! 
Robogator is the animal robot,that moves like an alligator. It will protect its area and jumps forward and snap at anything that comes too near. Watch out! 
Color Sorter is a robotic sorting machine that can sort different colored objects and dispense them as you please. It can easily be modified with a catapult mechanism that can precisely shoot the different colors where you like. 
Alpha Rex is the ultimate robot. It is a humanoid robot, easy to assemble and with multiple functions; it walks and turns, dances, talks, can see and avoid obstacles, can grab and distinguish between different colored objects. 
 
 
 

What kind of sensors come with the MINDSTORMS NXT?

1 Ultrasonic Sensor: makes the robots ‘see’, it can measure distance, movements and detects objects.  
2 Touch Sensors: make the robots ‘feel’, reacting to touch or release. 
1 Color Sensor: The Color Sensor is a three-in-one sensor; It acts as a Color Sensor, accurately distinguishing between different colors, it acts as Light Sensor, detecting light settings, both ambient light and light intensities from surfaces, and also works as a Color Lamp, shining bright red, green or blue. 

Additional sensors and accessories are available through the LEGO online shop. 

How many motors come in the set?

3 Interactive Servo Motors with built-in Rotation Sensors for precise control of your robot’s movement. 

What is a servo motor?

An electric motor whose speed or position is controlled by a closed loop feedback circuit that can sense its position. The speed of the motor is measured by a tachometer. The tachometer produces a voltage that is proportional to the speed. This voltage is compared to a reference point and the difference, or error, is used to adjust the speed of the motor, either up or down. 

What kind of software does the set come with?

The LEGO MINDSTORMS NXT 2.0 comes with an intuitive easy-to-use programming software. It has PC and Mac compatible software interface, powered by LabVIEW from National Instruments. It has an intuitive, icon-based drag-and-drop environment for "building" programs by connecting command blocks.

Also, it includes 16 fun and action-packed robot challenges with step-by-step building instructions to introduce beginners to the process of building and programming their very own robots. 

Is there any difference in the NXT micro-controller coming with the NXT 2.0? 
No. It is the same 32-bit micro-controller with 256 KB memory as in the NXT 1.0 set (#8527). 

There is no Light Sensor in the set – will it still be available?

Yes. Though the new Color Sensor compliments the functionality of the old Light Sensor, our online store will still be selling the Light Sensor.

 
There is no Sound Sensor in the set – will it still be available?

Yes. You can purchase the Sound Sensor through our online store. 

Can advanced users program the NXT with other programming languages and applications?

Yes. Since the NXT generation was launched in 2006 a big collection of languages and applications has been adapted to work with the NXT, mostly developed by hardcore users in the global MINDSTORMS community.

 
Notably, the NXT can also be programmed with LabVIEW, the high-end programming environment on which the NXT programming language is based.  
To create programs for the NXT using LabVIEW you can download the free LabVIEW Toolkit for LEGO® MINDSTORMS® NXT via the National Instruments website: http://www.ni.com/academic/mindstorms/ 

Read more about alternative programming languages on www.legomindstorms.com 

Price:£ 219.99

Cinemin Overview

Taking projection out of boardrooms and movie theaters and into the palm of your hand is WowWees Cinemin suite of ultra-portable multimedia micro projectors, powered by Texas Instruments DLP Technology for ultra clear picture quality. Utilizing the same technology commonly found in high-definition TVs, classroom projectors and large-scale cinema houses, the Cinemin projectors have been designed to work with popular mobile devices, such as the Apple iPod and iPhone.

Features

• The pocketsize multimedia pico projector that makes it amazingly simple to show and share your movies, videos, photos, games, and slides with friends anytime, anywhere.
• Perfect for small groups and small rooms; out and about; and where TVs can't go.
• Swivel's unique 90degree hinge makes it easy to project on any surface - without having to prop it up or use a tripod.
• In a dimly lit environment, Swivel can project a crisp 60-inch (1.5m) image from over 8 feet (2m) away, or floor-to-ceiling in a typical room.
• Swivel features the unrivaled power of Texas Instruments’ DLP projection technology. That means an ultra-clear, high contrast picture with vivid color. Why DLP vs. LCD?
• Plug and play. Using the simple AV-in jack, Swivel connects to a wide variety of personal media players - including iPod, iPhone, Flip Video, PSP, digital cameras, portable DVD players, netbooks, and smartphones with video-out functionality. Full list of compatible devices.
• Listen to the built-in speaker, or connect your portable speakers to the headphone jack for even bigger audio.
• Enough juice to enjoy a full movie, Swivel's rechargeable battery lasts over 2 hours.
• Swivel comes with a stylish padded carrying case and an AC power adapter with four interchangeable international plugs.

Techincal Specification

Size

• Dimensions: 120mm x 52mm x 22mm | 4.7" x 2.1" x 0.9"
• Weight: 170g | 6oz
• Mid-body hinge: 90deg

Image

• Projection technology: DLP by Texas Instruments
• Resolution: 480 x 320 (HVGA)
• Focus: Manual
• Light source: LED
• Brightness: 8 ANSI lumens
• Contrast ratio: 1000:1
• Viewable range: 2.6m | 8.5'
• Diagonal image size: 15cm - 1.5m | 62" - 60"
• Aspect ratio: 3:2
• Power consumption: - 3 watts
• Lamp life: more than 20,000 hours
• Fan: Nope (it's super quiet)

Sound

• Speaker: 0.5w monophonic
• Headphone jack: 3.5mm
• Volume control: Manual

Power

• AC: Yes, via power adapter or USB
• Battery type: Lithium-Polymer
• Battery capacity: 3.7V / 1700mAh
• Battery life: 135 minutes
• Battery recharge time: 180 minutes
• Battery replaceable: Yes

Contents

• AC/DC power adapter (with four plugs: North America, UK, Europe, Australia)
• USB (A) to mini USB (B - 5 pin) cable - for connecting Swivel to the AC/DC adaptor or to a computer for charging only
• iPod/iPhone adapter – with AV out and mini USB (B - 4 pin) port for connecting to a computer
• USB (A) to mini USB (B - 4 pin) cable - for connecting the iPod/iPhone adaptor to computer for charging or syncing data to your iPod/iPhone
• 3.5mm to 3.5mm cable - for connecting iPod/iPhone adaptor to Swivel
• AV composite to 3.5mm cable - for connecting a media player (eg. DVD player, Flip Video camcorder) to Swivel
• Battery
• Padded soft case with Velcro flap
• Quick start guide

Price:£ 299.99

The most exciting feature of Rovio is that it incorporates the incredible Northstar technology. Northstar is a system that creates a microi-GPS system for your home, allowing the Rovio to navigate your home with pinpoint accuracy. With Northstar Rovio always knows exactly where it is and where you want it to go next. The built-in web camera has full audio and video streaming capability so you can spy on your home from anywhere in the world you have a

Web connection and uses the reliable 802.11b/g protocols for true WiFi access. Check in to see if you home is secure, or to get a comforting look at pets, or to dynamically web conference with family members or colleagues at work. Rovio's neck-mounted camera and microphone can be accessed over the web from cell phones, personal computers, or even some video game consoles (if they are web enabled). Use your personal computer to create navigation routes for Rovio by marking way points in your home with its easy to understand companion software. Simply mark a way point and Rovio will move to the desired location without any need for you to micromanage the navigation; just point and click! Since Rovio has self-docking capabilities, you can send it back to base for a recharge with a single touch of a web browser button.

Price:£ 299.99

Mechanics: The i90 is the result of extensive efforts to develop a robot that would be fast and strong, while itself remaining lightweight and nimble. The wheel-based platform's two 12V DC motors with Integrated 800 Count per Cycle Optical Encoder each supply 40kg.cm of torque to the i90's 18 cm (7 in.) wheels, yielding a top speed in excess of 1 m/s (3.3 ft/s). Weighing only 6kg (16 lb.), the system is light, but it can carry an additional payload of 15 kg (33 lb.). (Optional 40Kg) Sensors: i90 offers full WiFi (802.11G) wireless, multimedia, sensing and motion capabilities and comes with a wide range of sensor, camera, and audio modules, sufficient to serve in any variety of applications. The i90 offers broad expandability as well for projects that may require additional sensors, even specialized modules. Powered by separate RC servo motors, the integrated camera head can pan and tilt independently. ArchitectureThe i90's underlying technology evolved from Distributed Computation Robotic Architecture: Originally developed for Humanoid (HR) Robot. Using this approach, high-level control of the robot is maintained by a remote or local PC/server communicating by a secure wireless link. Low-level functionality is managed by an onboard digital signal processor (DSP) while computationally intensive operations are performed offboard. The result is a robot that's lighter, draws less power, runs longer and is dramatically less expensive than a fully bundled or self-contained system. Moreover, since primary processing resides in a server, any hardware upgrades to the central unit are shared by all the robots it controls. With its integrated high bandwidth (54Mbps) WiFi 802.11G wireless module, the system can upload all sensor data to a PC or server at rates in excess of 10Hz. Similarly, streaming audio and video (up to 30 fps) either for direct monitoring or for processing by high-level AI schemes is a snap. Commands and instructions sent to the i90 via the same wireless link also pass at rates exceeding 10Hz, providing real-time control and access. The i90 includes all WiRobot development software components (for MS Windows 2000 and up), enabling easy access to all data and information in a standard Microsoft Windows programming environment (e.g., MS VB and VC++). Under the approach of using a separate PC for high-level control, there are no longer onboard restrictions on a mobile system's processing power, memory and storage. For users of non-Windows operating systems (e.g., Linux), we will provide the raw communication protocol for direct integration with any other system/device. With the i90 system, researchers can develop a specialized intelligent robotic assistant, security robot or simply use it as a platform for a variety of projects built around applications such as human-machine interaction, mobile system navigation, robot behavior, image processing, object recognition, voice recognition, teleoperation, remote sensing, map building and localization etc. The i90 system is fully integrated and each robot is fully assembled and tested prior to shipping so that it arrives ready for use.

Price:£ 3,500.00

In addition to its 25 degrees of freedom, Nao has of an inertial power station, 2 cameras and sensors including ultrasounds, which enable him to apprehend its environment with precision and stability.

Multiple interactions
The capacities of voice synthesis, voice recognition added to the sound localization and the capacitive sensors make Nao a really interactive invaluable tool.
Nao comes with infrared and wifi communications allowing seemless updates and control of system.
Entirely programmable
Nao is entirely programmable thanks to Choregraphe, our application program interface graphic which you are experts or beginners in the field. You can create or publish behaviors in C++ or using the languages of scripts Python or Urbi.

Nao is delivered with its complete documentation.

Price:£ 10,603.00

RS Media bring technology to life, playing MP3's, MPEG4's, and taking photos & videos as he interacts with his environment. He has a head-mounted camera, a colour LCD screen in his chest, a full speakers system embedded in his armor, 40 MB of internal memory, and an external memory card slot. Control RS Media with his controller or the media controls embedded on his hands; play Java games, navigate the media menus, switch between his four personalities (RS Media, Service Bot 3000, Space Bot, and Billy-Joen Sapien) or create your own personality using the RS Media editing suite software. The RS Media is able to walk around the house, effectively "seeing" with infrared vision and moving about like an old man in a park feeding pigeons thanks to foot and gauntlet sensors. If the robot "hears" a sound, it will investigate and confront the culprit. * It can display an image or MPEG video downloaded by the user onto the robots removable SD memory sticks, on the LCD display * The ability to store body movements with the user being the puppet master, like Robosapien V2 can. However, it will allow the user to edit those movements with the robots accompanying BodyCon editing package * You can record and store your voice into the robots SD memory sticks which can be played back by the robot * Includes a USB port, protocol version 1.0, for interfacing with the robot * It can play back music files that you download to it through its 11 watt stereo speakers; making the robot something akin to a programmable roving boom box. * You can play Java games and navigate the media menus. The most interesting feature of the new Robosapien RS Media robot is the ability to modify and swap personalities, thanks to the removable SD memory cards.

Price:£ 299.00 Special Price:£ 169.99

The heart of the new system is the NXT brick, an autonomous 32-bit LEGO microprocessor that can be programmed using a PC, or for the first time in the retail offering, a Mac. After building their robots, users create a program within easy-to-use yet feature-rich software, powered by LabVIEW from National Instruments. Downloading programs to an invention is easy. Users with Bluetooth®-enabled computer hardware can transfer their programs to the NXT wirelessly, or anyone can use the included USB 2.0 cable to connect their computer to the NXT for program transfer. The robot then takes on a life of its own, fully autonomous from the computer. The inclusion of Bluetooth technology also extends possibilities for controlling robots remotely, for example, from a mobile phone or PDA. When LEGO MINDSTORMS launched, we fundamentally changed the way people viewed LEGO building and play and helped spark the trend of affordable and attainable consumer robotics, says Jurgen Vig Knudstorp, CEO, LEGO Group. “Eight years later, we're ready to improve upon the single best-selling product in the company's history. We've developed the new toolset with expanded components and capabilities to challenge our existing community of dynamic fans. Meanwhile, the system's new software, design and 30-minute quick-start program are geared toward recruiting a new, younger generation of robotics enthusiasts.

Price:£ 179.99 Special Price:£ 169.99

• Wheels supported with inner and outer race sealed ball bearings (the wheels are NOT cantilevered or direct driven from the gear motor shaft).
• Wheels are driven with powerful 52mm diameter gear motors with heavy duty #35 chains.
• The treads and four powerful motors allow this robot to ascend/descend stairs and go over most terrain.
• Robot is enclosed and can be sealed making it water tight.
• Chassis is made from aircraft grade aluminum. The design uses all laser cut parts with mortise and tenon design for precise alignment and mating of the parts. The frame is ribbed and gusseted making it very rigid. Welded construction using TIG and MIG for a solid chassis.
• The robot is completely symmetric and invertible.
• It is about 38 inches long and 20 inches wide by about 9 1/2" high (tread height). There is a very large center cavity for batteries, electronics, cameras, computers, etc. Wider chassis are also available (~26” wide).
• The bottom cover is flanged and all the holes are laser cut and then hand tapped for a perfect fit and seal.
• Custom Treads with aggressive All Terrain pattern. Positive traction. The composite rubber and UHMW wheels with timed teeth that match the cutout pattern on the treads.
• NiMH Battery power 24V 20Ahrs for the drive. 12V 4.5Ahrs for the video and control. Provides over 1.5 hours of continuous driving under standard conditions, If driven intermittently the robot’s video and controls will last over 4 hours.
• Videos are available of the Treaded ATR on our HD2 support page (http://www.superdroidrobots.com/HD2.htm).
• The HD2s are made from aluminum, so they will not rust. They are generally supplied with a wire brushed look. This feature sand blasts the exterior of the chassis and powder coat it with a satin or flat color of your choice.
• This robot is also equipped with a roll cage which includes a heavy duty ¾” round tube frame structure bent and welded to protect top mounted camera systems from accidental roll over.

OSD (On Screen Display). This add-on allows the user to view all the robot’s information thought the wireless video link. The run time (started at the time the robot is turned on), the 24V battery voltage, 12V video/control voltage, and current (Amps) are all relayed back on the OCD as shown in the images to the below:

Price:£ 9,600.00

The HD2 robot surveilance kit comes with everything you need including the charger. All you need is a PC with windows XP or vista that is connected to a wireless network or a PC with a wireless network card and you can set it up peer to peer as an adhoc network. When you receive the robot you will need to configure the wireless bridge, iPocket232, and video server to your network. Instructions for doing this are provided with the robot

Price:£ 8,500.00

The WiFi Custom Control Interface Package - TE-900-002 includes the program, gamepad controller, WiFi Bridge, Ethernet converter, control board, programming, etc so you can drive the robot using your gamepad controller. The pan and tilt are part of the custom robot (not part of the camera) so the control of the camera pan and tilt is also performed with the gamepad controller. Of course you can just use your mouse to control the robot too if you don't want to use the gamepad controls. If you set up your router with port forwarding, you can control and monitor your robot from anywhere that has internet access with your program.

The robot itself is an extremely rugged well built robot. The wheels are axle mounted and are supported using sealed ball bearings. The motors allow this robot to climb walls. This is a rugged frame made of 1/8" thick aluminum and includes our IG32P gear motors. The aluminum is all laser cut for an exact fit-up and then hand welded and polished.

The base is 12.25" wide x 17.25" long.  Note, these dimensions do not include weld filler, which adds a little to the overall dimensions. As configured it has a ground clearance of about 2 5/16". The width with the wheels is about 21" and the length is about 21.5".

Price:£ 2,600.00

Hawk is designed and built on i90 robot base, featuring two large arms (Hawk Arms), dual-camera animated head (Hawk head), indoor GPS navigation system, and auto-docking/recharging station.

Price:£ 20,000.00

Usage: # Showroom, Tradeshow & Museum as Autonomous Tour Guide/Receptionist Robot # Robotic Development Platform for Academic and Research Institutes

Price:£ 20,000.00

Sentinel2 began from the idea of developing a office / home version of the autonomously patrolling robots for our industrial clients. The challenge lay in redesigning the Constellation system, the navigation technology, for a residential environment. Within working facilities, Constellation must often receive and send data over long distances and compete with other high-energy wireless communication systems on near spectra. The office / home environment offered the opportunity to shift Constellation's focus away from power and on to sensitivity. The resulting residential version of Constellation is low power system that can provide high accuracy with only few components. With Constellation's redevelopment complete, providing the core functions of intelligent navigation: localization, path planning and collision avoidance, followed easily. Sentinel2 derives its name both from its ability to maintain awareness of its location within its environment and also the base robot's typical application in commercial and industrial settings as a security and remote monitoring robot. As a package, Sentinel2 provides users with the base functionality of intruder detection, remote monitoring and telepresence as application modules, but also includes the Developer Toolkit, enabling advanced users to create their own tasks for the robot to serve. Moveover, the core technology is platform independent, permitting integration of the robot into any network system communicating via RS232 serial or Ethernet TCP/IP. The Sentinel2 package includes everything you need to deploy a fully autonomous intelligent robot in your office / home. Hardware components include 3 pairs of navigation transponders (additional transponders can be ordered separately), an intelligent charging station and the most robust robot platform we've developed. Once set up, the robot can patrol its environment and self-regulate its power supply, returning to the charger when necessary. These core functionalities support Sentinel2's included software modules: telepresence and remote monitoring. Also, included is its Robotnik Kit, a software development toolkit that provides the means to program your robot to serve new tasks and roles limited only by one's creativity. Sentinel2 package contents: - Sentinel2 robot - Sentinel2 Charging Station - Constellation navigation system with 3 pairs of transponders (additional transponders can be ordered separately) - Telepresence & Remote Monitoring modules - Robotnik software developer toolkit

Price:£ 6,300.99

Co-Positioned Camera and Grips SCOUT2 is a wrist-mounted camera that greatly facilitates remote manipulation of objects. Optionally, you can choose to have cameras on both wrists, maximizing the robot's ability to survey its surroundings. With their position coincident to the robot's gripping digits, the cameras uniquely enable remote users to get an eye on whatever the robot is reaching toward. Each of the robot's arms has five degrees of freedom, excluding the hinging DOF of the gripper joint. The lifting capacity of each gripper is 300 g while the chassis has a carrying capacity of 15 kg. SCOUT2 travels at a top speed of 1 m/sec and has 7 infrared distance sensors and 3 ultrasonic rangefinders onboard, but also has a bumper equipped with shocks in case of an unavoidable collision. Two lamps on the front of the robot also provide near-field illumination.

Price:£ 6,900.00

This ready to use mobile robot platform is designed for researchers developing advanced robot applications such as remote monitoring, telepresence and autonomous navigation/patrol.

Price:£ 3,900.00

INCLUDED::
-Chassis: 26 precision laser cut 5053 aluminum body and leg components in one of three anodized colors, Silver, Red or Black.
- Battery: 6V 3300mAh NiMh + Switch Harness
- Electronics: p.Brain-SMB + HexEngine + RJ232 + ESD200 Bluetooth
- Head Option: Pan & Tilt Kit + Servos: HS-225BB & HS-322HD
- Miscellaneous: PP3 9V Battery Box + Black Cable Ties x 100
- Servo Pack: Recommended: 12 x HS-645MG + 6 x HS-225BB

ELECTRONICS::

The p.Brain has been in development for some time but the PIC18F version lacked the processor power to perform body rotation/translation and terrain adaptation and only ran at 30Hz refresh. With this version, the same engine that previously ran off-board on a DOS machine, now runs on-board on the p.Brain and at refresh rates up to 100hz. The pBrain-ds is being developed as a single solution to any hex or octoped with 3DOF leg arrangement. The p.Brain not only does all the leg locomotion, inverse kinematics, body rotation/translation and terrain adaptation, it also incorporates 24 channels of hi resolution PWM outputs, so no need for an additional SSC! and 8 analogue/digital inputs for ground contact sensors.

The p-Brain-ds can be user configured to different leg geometry and servo types via terminal software that gives endless configuration for any hexapod design. All that changes between designs is the motherboard that the p.Brain-ds plugs into. The motherboard supplies power, serial connections and distributes the PWM signals around the body. Control of the locomotion engine is via simple serial data, either RS232 or TTL level at 9600 or 19200bps. Bluetooth control connection The control connection to this Hexapod is through a simple bluetooth serial port via the p.Brain-ds TTL control port.

The p.Brain has two serial ports that can be dipswitch configured as either control data or terminal data. In this case both control and terminal data are mapped to the same TTL port. There are future plans to add I2C control communications. Unique Coxa Design This hexapod has a unique coxa design which came about through having to make the body depth as small as possible for the V4 hexapod. Take a look at the third picture in the gallery to the left. You can see that the lower body segment is not below the coxa, but inside the coxa! This not only allows the body depth to be smaller, but also gives the added benefit of being able to remove a leg by unscrewing the coxa servo horn without the need to remove the lower body. Very useful while calibrating and for repairs! Direct Servo Coupling You may also notice that there are no servo horns being used! This design has had the servo spline punched directly into the Aluminium femur and body.

Price:£ 1,150.00

This ready to use mobile robot platform is designed for researchers developing advanced robot applications such as remote monitoring, telepresence and autonomous navigation/patrol.

Price:£ 4,500.00

TheRobotShop.com presents SCOUT, a rugged wheeled WiFi robot equipped with two gripping arms that optionally provide the robot with either one or two wrist-mounted CMOS cameras. Combining mobility and a new ability to grasp and manipulate, SCOUT offers users broad versatility in its application.

Price:£ 5,500.00

The X80 is the result of extensive efforts to develop a robot that would be fast and strong, while itself remaining lightweight and nimble. The wheel-based platform's two 12V DC motors each supply 300 oz.-inches of torque to the X80's 18 cm (7 in.) wheels, yielding a top speed in excess of 1 m/s (3.3 ft/s). Two high-resolution (1200 count per wheel cycle) quadrature encoders mounted on each wheel provide high-precision measurement and control of wheel movement. Weighing only 3.5 kg (7.7 lb.), the system is light, but it can carry an additional payload of 10 kg (22 lb.). X80 offers full WiFi (802.11g) wireless, multimedia, sensing and motion capabilities and comes with a wide range of sensor, camera, and audio modules, sufficient to serve in any variety of applications. The X80 offers broad expandability as well for projects that may require additional sensors, even specialized modules. Powered by separate RC servo motors, the integrated camera head can pan and tilt independently. The X80's underlying technology evolved from Distributed Computation Robotic Architecture. Using this approach, high-level control of the robot is maintained by a remote or local PC/server communicating by a secure wireless link. Low-level functionality is managed by an onboard digital signal processor (DSP) while computationally intensive operations are performed offboard. The result is a robot that's lighter, draws less power, runs longer and is dramatically less expensive than a fully bundled or self-contained system. Moreover, since primary processing resides in a server, any hardware upgrades to the central unit are shared by all the robots it controls.

Price:£ 1,500.00

This information can then be used in several applications. OptiLogic RS-100 Industrial Laser Rangefinder is a great pre-made laser rangefinder to fit your needs and Opti Logic RS100 Industrial Rangefinder is also part of family of Opti-Logic Industrial laser range finders that are made to fit almost any project you will deal with.

Price:£ 2,800.00

Mechanics
The X80SV is the result of extensive efforts to develop a robot that would be fast and strong, while itself remaining lightweight and nimble. The wheel-based platform’s two 12V DC motors each supply 300 oz.-inches(22kg.cm) of torque to the X80’s 18 cm (7 in.) wheels, yielding a top speed in excess of 1 m/s (3.3 ft/s). Two high-resolution (1200 count per wheel cycle) quadrature encoders mounted on each wheel provide high-precision measurement and control of wheel movement. Weighing only 3.5 kg (7.7 lb.), the system is light, but it can carry an additional payload of 10 kg (22 lb.).

Sensors
X80SV offers full WiFi (802.11g) wireless, multimedia, sensing and motion capabilities and comes with a wide range of sensor, camera, and audio modules, sufficient to serve in any variety of applications. The X80SV offers broad expandability as well for projects that may require additional sensors, even specialized modules. Powered by separate RC servo motors, the integrated camera head can pan and tilt independently.

Architecture
The X80SV’s underlying technology evolved from Dr Robot’s Distributed Computation Robotic Architecture, originally developed for Dr Robot’s Humanoid (HR) Robot. Using this approach, high-level control of the robot is maintained by a remote or local PC/server communicating by a secure wireless link. Low-level functionality is managed by an onboard digital signal processor (DSP) while computationally intensive operations are performed offboard. The result is a robot that’s lighter, draws less power, runs longer and is dramatically less expensive than a fully bundled or self-contained system. Moreover, since primary processing resides in a server, any hardware upgrades to the central unit are shared by all the robots it controls.

With its integrated high bandwidth (11Mbps) WiFi 802.11 wireless module, the system can upload all sensor data (including encoder sensor readings) to a PC or server at rates in excess of 10Hz. Commands and instructions sent to the X80SV via the same wireless link also pass at rates exceeding 10Hz, providing real-time control and access.

The X80SV includes all WiRobot development software components (for MS Windows 2000 and up), enabling easy access to all data and information in a standard Microsoft Windows programming environment (e.g., MS VB and VC++). Under the approach of using a separate PC for high-level control, there are no longer onboard restrictions on a mobile system’s processing power, memory and storage. For users of non-Windows operating systems (e.g., Linux), Dr Robot will provide the raw communication protocol for direct integration with any other system/device.

With the X80SV system, researchers can develop a specialized intelligent robotic assistant, security robot or simply use it as a platform for a variety of projects built around applications such as human-machine interaction, mobile system navigation, robot behavior, image processing, object recognition, voice recognition, teleoperation, remote sensing, map building and localization etc.

The X80SV system is fully integrated and each robot is fully assembled and tested prior to shipping so that it arrives ready for use.

Price:£ 1,650.00

The ESD200 supports 30 meters of wireless transmit distance.

Price:£ 59.99

There are mounting holes on the top body plate for the p.Brain-SMB or SSC32 controllers, with the electronics mounted underneath the top body plate, there is still enough room within the body for a 5 cell Sub-C battery pack. Also, a PP3 battery holder (optional) can be fitted within the body frame for a clean logic power supply. At the front of the hexapod there is a servo mounting point for an optional pan/tilt head.

Price:£ 120.00

Price:£ 189.99

The HexEngine is a software module designed for the p.Brain-ds24 hardware module. The HexEngine is a user configurable locomotion engine for hexapod robots. HexEngine is configured via a serial port (RS-232 or TTL level) using standard terminal software such as HyperTerminal or TerraTerm (As HyperTerminal is no longer included with Vista, I recommend using TeraTerm Pro available here: TeraTerm Pro V2.3). Once the HexEngine is configured for the target hexapod platform, the hexapod locomotion can be controlled using simple direction commands over either the RS-232 or TTL serial port. The idea of the HexEngine is to allow you to get your hexapod up and running with minimum fuss, allowing you to concentrate on obstacle avoidance or other high level control applications.

The p.Brain-HexEngine reqires a carrier board such as the p.Brain-SMB.

Price:£ 139.99

This pan head kit for the MSR-H01 hexapod consists of 3mm black acrylic plates and all fixtures and fittings required for assembly. The kit requires one HS-225BB or HS-225MG servo which is not included. The pan servo can be mounted in one of two positions, allowing the head to be closer in or further away from the pivot point.

Price:£ 19.99

Key Features:

• DC Current Rating: 5A
• DC Voltage Rating: 32V
• Type: ON-ON
• Wire Guage: 32/02 1mm Sq.
• Cable Length: 150mm (6") approx
  
  The switch can be mounted in the body of the MSR-H01 Hexapod

Price:£ 7.99

Pre-Order Say anything and Spykee vox responds to your voice. Spykee vox plays your music in stereo and dances to the rhythm of the sounds. Featuring the Universal IR remote control, Spykee vox can now control your TV.

Price:£ 129.99

He measures only 16cm and weighs an amazing 300 grams and comes ready to play straight from the box. You can choose from 4 modes where I-Sobot can perform fun and quirky scenes from Western battles to voice command mode that includes 10 words of phrases to say to I-Sobot where he will respond.

Price:£ 210.00

Resourceful and adventurous, R2D2 is ready, willing and able to serve! Navigates to find you! Rolls, spins, dances and plays music! Guards and protects your room! Remembers and reacts to famous Star Wars characters! Some awesome features are: - light beam - droid mood status indicator - infrared location sensors - sonar navigational technology - sound processing microphones - motorized treads - voice recognition software - extendable utility arm - special "secret" features - and much, much more....

Price:£ 199.99

These basic specs combined with the teaser image, above, should be enough to perk up the ears of all the consumer robot enthusiasts out there. Spykee can stream live video to your Mac or PC over a wireless connection. It can be controlled from your PC via a simple web interface from anywhere on earth as long as you have a internet connection! The Spykee certainly improves on Meccano's earlier metallic attempts at robot sets: this little fella is capable of feeding a webcam video stream to a PC over the aforementioned wireless connection.

Price:£ 199.99

Price:£ 2,600.00

Price:£ 5,600.00

Price:£ 5,600.00

Price:£ 5,200.00

Price:£ 5,800.00

Price:£ 169.99

Price:£ 299.99 Special Price:£ 219.99

Price:£ 5,399.00

Price:£ 900.00